How to assemble your...
.............. MVP and/or All Star chair(s)
Tools required: NONE
Time required: Approx. 5-10 minutes
Assembly: Your carton will contain instructions as how to assemble your chair.
This is minor assembly taking a few minutes per chair, and no special tools.
Your carton will contain:
- 1 ea. back assembly...ready to be attached to the
seat with 3 bolts
(Allen wrench included).
- 1 ea. chair frame (seat) assembly and the arms
ready for easy installation.
- 1 ea. gas lift cylinder with telescopic cover.
- 1 ea. five (5) star base with snap in casters.
Step 1.
Remove all components from carton, and remove all wrapping. Attach the arms to the seat, then the seat to back with the 3 bolts provided. Carefully place the combined seat and back assembly face down on the floor. |
 |
Step 2.
Place the small diameter end of the Gas lift Cylinder into the
centered hole located on the bottom of the Chair Frame Assembly
with the telescoping sleeve in place, into the hole on the bottom of
the chair control mechanism (the black metal device of which the levers/paddles are) .
Note: Make sure the three piece Telescopic Cover is installed
on the Gas lift Cylinder before you place the cylinder into
chair. |
 |
Step 3.
Insert the bottom of the cylinder into the hole at the center of the
5-star base castors should already be snapped in. |
 |
Step 4.
As you return the chair to its upright position, the various
components will settle into place. Refer to the website "Adjust your MVP" for personally fitting the chair to you! |
 |
For those who want someone else to unpack and/or install your chairs...
...US Nationwide...We Suggest... www.werereadytoassemble.com 1-800-978-2669
Usually a $40.00 minimum and $10.00 for every chair after the first 4.
They can be at your facility within 24 hours of product arrival.
|
